Transmission repair

Transmission repair in Burnaby

Automatic, CVT, dual-clutch and manual transmissions, Sundays included.

4.9 from 158 Google reviews
as of Oct 2026

Last updated

Dreamville Auto does transmission work of every kind at 6432 Beresford St. in Burnaby: fluid services, clutch jobs, rebuilds and replacement with a used or rebuilt unit. Call or text (604) 442-8265 and tell us how the car is shifting.

Warning signs

What are the signs of a transmission problem?

The common signs are slipping, a delay before the car goes into gear, harsh shifts, a whine or shudder, red fluid under the car and a burning smell. The earlier one is caught, the more repair options remain open.

SignWhat it usually meansHow soon
Slipping: revs rise but the car doesn't speed upWorn internal clutches or bands, or low fluid pressure.Soon. Slipping creates heat, and heat speeds up the wear.
A delay before drive or reverse engagesLow fluid, a worn seal or a valve body fault.Soon.
Harsh, late or clunky shiftsDegraded fluid, a failing shift solenoid or a software fault.Soon.
A whine, drone or shudder from a CVTBelt or pulley wear, or fluid that has broken down.Soon.
Red or brown fluid under the carA leak at the pan gasket, a seal or a cooler line.Right away if it is dripping steadily.
A burning smellOverheated transmission fluid.Right away. Pull over and let it cool.
Stuck in one gear with a warning lightLimp mode: the computer holds a single gear to protect the transmission.Right away. Drive only as far as a shop.
From Google reviews

What customers say

Transmission work

"I had some major transmission work done and the experience great... definitely recommend the brothers"

Randy M., on Google
Honest advice

"...the old truck I had 400km+ and wasn't worth the transmission repair, Murad explained he could do it but wouldn't advise it."

Conor J., on Google
Big jobs

"They are great guys, they worked on my several vehicles. Pretty big and difficult jobs, the cost was always reasonable and the results were always perfect!"

Mert T., on Google

Reviews as of Oct 2026. Read all 158 on Google

Transmission slipping or shifting hard?

Call (604) 442-8265
Heat and hills

What wears out transmissions around Burnaby?

Heat is the leading cause of automatic transmission damage. As the fluid ages and overheats, it loses its ability to cool, lubricate and carry hydraulic pressure, and the clutches inside begin to slip. Local driving produces plenty of heat: crawling traffic on Kingsway and Lougheed Highway, the climb up Burnaby Mountain, and towing a trailer up the Coquihalla toward the Interior. Many owner's manuals class towing and heavy city driving as severe service, with a shorter fluid interval.

Leaks

A slow drip from a pan gasket or cooler line lowers the fluid level until the transmission slips or overheats. Many newer automatics have no dipstick, so a low level often goes unnoticed until the symptoms start.

What happens if you keep driving

Damage inside a transmission feeds on itself. Slipping clutches create heat and debris, the debris clogs the passages and solenoids in the valve body, and pressure drops further. A problem that a fluid service or a new seal could have fixed can become a rebuild.

Which kind of transmission does your car have?

Most vehicles on Burnaby roads use one of four designs, and each tends to fail in its own way. Your owner's manual names the type.

Automatic
A torque converter and planetary gear sets change gears without a clutch pedal. Early signs: slipping, harsh or late shifts, a pause before drive engages.
CVT
A belt or chain runs between two pulleys that change size, instead of fixed gears. Common in many recent compacts and small SUVs. Early signs: a whine or drone, shudder when pulling away, revs rising without matching acceleration.
Dual-clutch
Two computer-controlled clutches pre-select gears for very quick shifts, as in many performance and European cars. Early signs: jerky low-speed engagement, hesitation from a stop, judder in traffic.
Manual
The driver changes gears with a clutch pedal and shift lever. Early signs: a clutch that slips or engages high, grinding when selecting a gear.
Your options

Repair, rebuild or replace: which does your car need?

The right job depends on what has failed inside and on what the car is worth. A transmission diagnosis usually narrows it down in this order.

  1. Road test.A drive shows when it slips, how it shifts, and whether that changes as the fluid warms up.
  2. Code scan.The transmission control module stores its own fault codes, which point toward a sensor, a solenoid or a ratio problem.
  3. Fluid check.The level, colour and smell of the fluid tell a lot. Metal or clutch material in it means internal wear.
  4. Leak and cooler check.Lines, seals and the cooler are inspected, since a leak can be the whole problem.
  5. Options.Once the cause is clear, the choice is between a fluid service, a repair, a rebuild or a replacement unit.
OptionWhen it fitsTrade-off
Fluid serviceThe fluid is old or burnt and nothing inside has failed.The smallest job. It will not fix worn clutches or a broken part.
Clutch jobA manual car's clutch slips, judders or engages high.Replaces the clutch disc and pressure plate; the flywheel is often resurfaced or replaced at the same time.
RebuildInternal wear or damage, with a sound case.The transmission comes out, worn parts are replaced, and it goes back in. Labour-heavy, but keeps the original unit.
Used unitAn older car where cost matters most.Usually the lowest-cost replacement. Its condition depends on the donor car's mileage and history.
Rebuilt unitExtensive damage on a car worth keeping.Most wear parts are new, and the car is off the road for less time than a rebuild of its own transmission.

If your car has a transmission dipstick, checking the level and colour as the owner's manual describes is a safe owner check. Most other transmission work needs a lift and shop equipment.

The Dreamville way

How we handle transmission work

  1. Codes read properly.We use Autel scan tools to read the faults the transmission has stored.
  2. Proof before a decision.We send photos and videos of the fluid and anything else we find, so you can weigh the options with us.
  3. The big decision is yours.Nothing beyond the diagnosis goes ahead until we call and you give your OK.
Pricing

How much does transmission repair cost in Burnaby?

Transmission repair cost in Burnaby depends first on which job the car needs: a fluid service is the smallest, a clutch job sits in the middle, and a rebuild or replacement is the largest. Diagnostics at Dreamville Auto start at $99. Call or text (604) 442-8265 with the year, make and model.

  • Transmission type. CVTs and dual-clutch units often cost more to rebuild or replace than a conventional automatic, and their parts can be harder to find.
  • Drivetrain. All-wheel-drive vehicles add a transfer case, and on some front-wheel-drive cars the subframe has to be lowered to remove the transmission.
  • Used or rebuilt. A used unit usually costs least. Rebuilding your own unit, or fitting a rebuilt one, costs more.
  • Related parts. Cooler lines, mounts, axle seals and the torque converter are often replaced at the same time.

Transmission work we do carries a 1-year warranty on parts and labour.

What affects how long it takes

A fluid service is the shortest job. A clutch job or a replacement takes longer, because the transmission has to come out, and a rebuild also depends on how quickly the internal parts arrive.

Upkeep

How do you make a transmission last?

Clean fluid of the right type, changed on time, matters most.

  • If you tow, climb hills or spend a lot of time in traffic, follow the severe-service fluid schedule. Some makers describe their fluid as lifetime fill; under severe use, many technicians still change it.
  • Come to a full stop before shifting between drive and reverse.
  • Stay within the towing capacity in your owner's manual, and consider an auxiliary cooler if you tow often.
  • Have any drip under the car checked early. A new seal costs far less than the damage low fluid causes.
  • Use only the fluid type your manual specifies. Many modern transmissions need a specific fluid, and the wrong one can cause harsh shifts.

Questions worth asking before you agree to a repair

  • What did the road test and scan show, and can I see it?
  • Is this a repair, a rebuild or a replacement, and why that option?
  • If it's a replacement unit, is it used or rebuilt, and what mileage or history does it have?
  • Which parts are covered by a warranty, and for how long?
FAQ

Transmission repair questions

Does car insurance cover transmission repair?

Usually not. ICBC's optional Collision and Comprehensive coverage exclude mechanical breakdown, rust, corrosion and wear and tear. If a collision damaged the transmission, the repair goes through that claim. An extended service plan may cover a failure, so read its terms before the work starts.

Can a CVT be repaired?

In many cases, yes. Fluid problems, sensors and some valve body faults can be repaired in place, and CVTs can be rebuilt. When the belt or pulleys are badly worn, a replacement unit is often the more practical choice, because internal parts for some models are hard to source.

Can a transmission leak be repaired?

Usually. Most leaks come from the pan gasket, an axle or input shaft seal, or a cooler line, and each can be replaced without rebuilding the transmission. After a long-running leak, it is worth checking for slipping damage as well.

Is it worth fixing the transmission on an older car?

Weigh the repair against the car's value and overall condition. A used unit can make a high-mileage car worth keeping. On a car that also needs several other major repairs, the money may be better spent elsewhere.

Where we are

If the transmission is slipping, drive in gently and avoid hard acceleration, or have the car towed if it will not hold a gear. Dreamville Auto is at 6432 Beresford St. in south Burnaby, close to Edmonds, Metrotown and New Westminster. When a warning light comes on with the shifting problem, our check engine light diagnostics page explains how the codes are read.

Request a transmission appointment

* required

So we can confirm your time. No marketing calls.

Your information is kept private and never sold. Privacy policy

Or come by

Drop in during opening hours, or leave the car in the after-hours key drop.

Address
6432 Beresford St.
Burnaby, BC V5E 1B3
Get directions
Phone
(604) 442-8265, call or text
Monday to Saturday10 am to 7 pm
Sunday9 am to 6 pm
Call now Book