Check engine light

Check engine light in Burnaby

Code reading and diagnosis for gas, hybrid and light diesel vehicles, starting at $99.

4.9 from 158 Google reviews
as of Oct 2026

Last updated

Check engine light diagnosis on a Honda with the hood up at Dreamville Auto in Burnaby

Dreamville Auto reads check engine codes with Autel scan tools at 6432 Beresford St. in Burnaby and tracks down the cause behind them. The light means the engine computer has detected a fault and stored a code describing it; diagnosis is the work of finding what actually failed. Call or text (604) 442-8265.

Check engine light flashing? Ease off the accelerator and call.

Call (604) 442-8265
Steady or flashing

What does the check engine light mean?

Cars and light trucks built since the late 1990s carry an on-board diagnostics system, known as OBD-II, that monitors the engine, the emissions equipment and parts of the transmission. When a reading falls outside its expected range, the system stores a code and turns on the light. How the light behaves tells you how urgent it is.

LightWhat it usually meansWhat to do
SteadyA fault that needs checking but is not causing immediate damage.Book a diagnosis soon. The car can usually be driven gently.
FlashingAn active misfire, which can damage the catalytic converter.Ease off, avoid hard acceleration and get it checked right away.
On, with other symptomsShaking, smoke, overheating or a loss of power alongside the light.Pull over when it is safe and call for advice.
On, then off againAn intermittent fault the computer has stopped seeing for now.Still worth having read.
From Google reviews

What customers say

2007 Bentley

"They diagnosed the issue quickly, kept me updated throughout the process, and got the car running smooth and looking immaculate."

Mohsen R., on Google
Diagnostic

"We walked in, got a full diagnostic done, and they had a solution for us within 30 minutes."

Shad A., on Google
Business customer

"Murad's extensive mechanical knowledge and deep understanding of vehicle diagnostics have been invaluable."

John S., on Google

Reviews as of Oct 2026. Read all 158 on Google

Light on right now? Bring the car in any day we are open.

Call (604) 442-8265
Common causes

Why is my check engine light on?

The light covers hundreds of possible faults, but a handful account for most of them. Codes that begin with P are powertrain codes, and each identifies a system and a fault condition rather than a specific failed part.

CodeWhat it meansCommon causes
P0300Random or multiple cylinder misfireWorn spark plugs or ignition coils, a vacuum leak, a fuel delivery problem
P0171System too lean (bank 1)A vacuum leak, a dirty mass airflow sensor, a weak fuel pump
P0420Catalyst efficiency below threshold (bank 1)An aging catalytic converter or a faulty oxygen sensor
P0455Large leak in the evaporative emissions systemA loose or worn gas cap, a cracked hose
P0128Coolant temperature below the thermostat settingA thermostat stuck open

Why lights stay on in the Lower Mainland

With no emissions test to pass, many cars here run with the light on for months. That carries a hidden cost: while the light is already lit, a second fault can set a new code without any new warning on the dash.

On light diesel vehicles, frequent short trips, especially in cold weather, can keep the diesel particulate filter from regenerating, because it needs a longer drive at full operating temperature to burn off soot. A restricted filter is a common reason for the light on diesels driven mostly around town.

Why it is worth fixing

An unresolved misfire can ruin the catalytic converter, an expensive part of the exhaust system. A mixture running too lean or too rich fouls spark plugs and oxygen sensors, and fuel economy usually drops before anything else is noticeable.

First steps

What should you do when the light comes on?

Check how the light behaves, rule out the gas cap, then book a diagnosis with a few notes in hand.

  • Check whether it is steady or flashing. The table above shows what each one means and how soon to act.
  • Check the gas cap. Tighten it until it clicks. A loose cap is a common cause, and the light can take several drives to go out once it is fixed.
  • Note what the car is doing. Write down when the light came on and anything you noticed: a rough idle, hesitation, a smell, or a recent fill-up or repair.
  • Leave the code in memory. Clearing it with a code reader erases the stored data that helps find the cause.
  • Book a diagnosis. Bring those notes with you. Intermittent faults are much easier to find with them.
Diagnosis

How does a check engine diagnosis work?

Reading the code takes a minute. Diagnosis takes longer, because the code is a starting point rather than an answer. A typical diagnosis moves through these stages.

  1. Codes and freeze-frame data.The scan tool shows each stored code and a snapshot of conditions when it set: speed, temperature and engine load.
  2. Live data.Sensor readings are watched with the engine running to see which values are out of range.
  3. Known issues.Many models have published technical service bulletins describing common faults and their fixes.
  4. Testing the suspect parts.Wiring, sensors and components are tested directly, for example with a smoke test to find an evaporative leak.
  5. Confirming the repair.After the fix, the codes are cleared and the car is driven to make sure the fault does not return.
The Dreamville way

How we handle a check engine light

  1. The right tools.We read your car's codes and data with Autel diagnostic tools.
  2. You see the fault.We send photos and videos of what we find, so the diagnosis is more than a code on a screen.
  3. Repairs only with your OK.Once we know the cause, we call to explain what the car needs before any repair begins.
Diagnostic price

How much is a check engine light diagnostic in Burnaby?

Check engine diagnostics at Dreamville Auto start at $99. Call or text (604) 442-8265 and tell us when the light came on and how the car feels. The time a diagnosis takes depends on how hard the fault is to pin down.

  • One clear fault. A single code with an obvious cause is usually the quickest to confirm.
  • Intermittent faults. Problems that come and go take longer, because the fault has to be caught while it is happening.
  • Several codes. They can share one root cause or be separate problems that each need checking.
  • Wiring. Electrical and wiring faults often take the most time to trace.
FAQ

Check engine light questions

Will the check engine light turn off by itself?

Often, if the fault was temporary or has been fixed. The computer rechecks the system on each drive and turns the light off after several trips without the fault. The code usually stays in memory for a while afterward, so a scan can still show what happened.

Can an auto parts store read the code?

Many will, with a basic scanner. That tells you which system set the fault, but not why. A full diagnosis looks at live data and tests the parts involved before anything is replaced.

Does BC still require emissions testing?

Not for personal vehicles in the Lower Mainland. The AirCare program ended on December 31, 2014. The light still matters, because the faults behind it can damage the engine and exhaust system over time.

Do you check hybrids?

Yes. We work on gas, hybrid and light diesel vehicles. A hybrid can also show separate hybrid-system warnings alongside the check engine light.

Where we are

Dreamville Auto is at 6432 Beresford St., a short detour from Kingsway. If you are deciding whether to drive in, our guide on driving with the check engine light on covers the warning signs that mean stop now.

Request a diagnostic

* required

So we can confirm your time. No marketing calls.

Your information is kept private and never sold. Privacy policy

Or come by

Come by while the light is on, any day we're open.

Address
6432 Beresford St.
Burnaby, BC V5E 1B3
Get directions
Phone
(604) 442-8265, call or text
Monday to Saturday10 am to 7 pm
Sunday9 am to 6 pm
Call now Book