Squealing or squeaking
Many brake pads have a small metal tab that squeals when the pad is nearly worn. It's a warning, not an emergency, but don't leave it for months. A light squeak on the first few stops of a damp morning can be surface rust on the rotors, which usually goes away once the brakes warm up.
Grinding
Grinding usually means the pad material is gone and metal is rubbing on the rotor. Stopping power drops, and the rotor gets damaged quickly, which turns a pad job into pads and rotors. Drive gently and straight to a shop.
A pulsing pedal or shaking wheel
If the pedal pulses or the steering wheel shakes when you brake, the rotors are often uneven. It tends to show most when you brake from highway speed or on long downhill stretches.
A soft, spongy or sinking pedal
A pedal that feels soft or sinks toward the floor can mean air or moisture in the brake fluid, a leak, or a problem with the master cylinder. Treat it as urgent. If the brake warning light is on as well, don't drive the car until it's checked.
Pulling to one side
If the car pulls when you brake, one side may be working harder than the other, often from a sticking caliper or uneven pad wear.
Getting your brakes checked in Burnaby
At Dreamville Auto, we send you photos and videos of what we find and call you for your OK before any extra work. A typical pads and rotors job is a few hours of shop time, and the shop is at 6432 Beresford St.